- 4号铣床的用途和优缺点......
- 4号铣床的工作原理有哪些?...
- 3号铣床的工作原理有哪些?...
- 3号铣床的用途和优点有......
- 3号铣床的优势与操作方......
- 3号铣床的优势和操作方......
- 伺服中走丝有哪些优点?...
- 平面磨床的工作原理有哪些?...
- 平面磨床的智能化与自动......
- 平面磨床的智能化与自动......
- 平面磨床的结构特点有哪些呢?...
- 平面磨床的工作原理与结......
- 平面磨床的工作原理有......
- 平面磨床的优势有哪些?...
- 平面磨床的价格有哪些影响呢?...
- 伺服中走丝的操作流程有......
- 平面磨床的操作方法和注......
- 铜公雕铣机的原理主要有哪些?...
- 平面磨床的操作方法和原......
- 4号铣床运行原理和操作......
提高电火花线切割机床的稳定性和精确度,荣田精机教你技巧!
提高电火花线切割机床的稳定性和精确度,荣田精机教你技巧!
图中左面是该驱动器的型号,右侧产品系列的标记Σ7(如左图), 目前早期还有Σ5系列(如右图),但这款系列的驱动器右侧未标注Σ5。
1. 驱动器面板操作按键介绍 Drive control panel instruction.
打开前面板,可以看到从左到右有4个按键,分别的功能为:
1号键 MODE/SET 键用于切换显示的按键
2号键 UP键用于增大(增加)设定值的按键
3号键 DOWN键用于减小(减少)设定值的按键
4号键 DATA/SHIFT键用于确定设定值的按键,还可显示设定值,以及用于移动光标,选择位数
Open the front cover, there are 4 buttons, the functions as follow:
1#button MODE/SET used for changing different parameters.
2#button UP used for increasing the value parameters
3#button DOWN used for decrease the value of parameters
4# button DATA/SHIFT for enter the value, showing the value and used for choosing the position.
The steps for checking the parameters of the drive and the operation for upgrading
1)每按一次1号键[ MODE/SET],显示窗出现不同的参数,分别从初始状态【run】的显示到【Fn000】、【Pn000】、【Un000】,然后又回到初始状态。
Each pressing of 1# button MODE/SET, different parameters will be display from【run】 to 【Fn000】、【Pn000】、【Un000】then back to XXX
2)本次升级涉及的参数为Pn系列的,因此,我们需要通过1号键【 MODE/SET 键】将参数调整显示到Pn000。
This step for updating Pn series parameters. Please use 1# button【MODE/SET】adjust the parameters showing Pn000
3)当数码管显示到Pn000时,这时末尾数字“0”是在不停闪烁。我们可以通过4号键【DATA/SHIFT键】,来选择需要调整数值的这一位来闪烁。当该位置上的数值在闪烁时,我们可以通过2号键【 UP键】或3号键【 DOWN键】,来调整数值。直至选好某个参数号码。如下图选择了Pn101这个参数号码。
When the Pn000 showing in the display. The last number “0” will be flashing. Please use 4# button【DATA/SHIFT】to choose the number need to be modified. Then please use 2# button【UP】and 3# button【DOWN】to adjust the value until choose a correct Number.
4)接着按住4号键【DATA/SHIFT键】大约3~4秒,进入到该参数号码的内容中,
Press 4# button 【DATA/SHIFT】3-4 seconds, the details of this parameters will be showing in the display.
此时光标会停留在最后一位上【即该数值在闪烁】,我们通过按4号键【DATA/SHIFT键】来移动光标【闪烁位置】,通过2号键【 UP键】或3号键【 DOWN键】,来调整该位置上的数值,当输入正确后,按住4号键【DATA/SHIFT键】大约3~4秒,退出该参数的编辑界面,回到Pn的参数号码界面。
Now, the cursor will stay in the last Number( it mean this number is flashing), Press 4# button【DATA/SHIFT】can change the position of the cursor( the flashing Number). using 2# button【UP】and 3# button【DOWN】to change the value of this position. After correct the Number, Press 4# button 【DATA/SHIFT】3-4 seconds, Exit the interface and back to Pn…
5)然后再选择下一个需要变更的参数号码,重复3、4步骤完成参数的设定。
Then choose the next parameters No, repeat Step 3,and step 4 to change it.
6)全部完成后,通过长按4号键【DATA/SHIFT键】退到初始界面。然后关闭电源,再启动电源,此时新设置的参数生效。
After updating all parameters, press 4# button 3-4 seconds, will Exit. Please power off the controller and restart it. The new parameters will be taken effect.
1)升级设置未全部完成前,切勿断电,如发生意外断电,通电后应复查前面所设置参数是否成功。
2)设置时,请注意机床的型号,选择对应的参数表!
3)设置完成后,必须复查一次参数的设置值是否正确。如果参数设置有误,会导致机床运行混乱,严重的将使机床受到损伤。
Attention:
1)Please don’t power off until finished all settings. If any unexpected power off during setting, please check all parameters from start.
2)Please check follow tables for different model machines; please choose the parameters according to the model of the machine.
3)After finishing setting the parameters, please re-check all parameters before running the machine. Or it may damage the machine.